INTOX Home Page
TRINEXAPAC-ETHYL ICSC: 1268
Date of Peer Review: March 1996

Ethyl 4-cyclopropyl(hydroxy)methylene-3,5-dioxocyclohexanecarboxylate
CAS # 95266-40-3 C13H16O5
RTECS # GU8473500 Molecular mass: 252.3
UN #
EC #
TYPES OF HAZARD / EXPOSURE ACUTE HAZARDS / SYMPTOMS PREVENTION FIRST AID / FIRE FIGHTING
FIRE Combustible. Liquid formulations containing organic solvents may be flammable.
NO open flames.
Powder, water spray, foam, carbon dioxide.
EXPLOSION


EXPOSURE
AVOID EXPOSURE OF ADOLESCENTS AND CHILDREN!

Inhalation See Notes.
Local exhaust.
Fresh air, rest. Refer for medical attention.
Skin
Protective gloves.
Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention.
Eyes
Safety spectacles.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
Ingestion See Notes.
Do not eat, drink, or smoke during work. Wash hands before eating.
Refer for medical attention.
SPILLAGE DISPOSAL PACKAGING & LABELLING
Do NOT wash away into sewer. Sweep spilled substance into sealable containers; if appropriate, moisten first to prevent dusting. Carefully collect remainder, then remove to safe place. (Extra personal protection: P2 filter respirator for harmful particles).
Do not transport with food and feedstuffs.
EU Classification
UN Classification

EMERGENCY RESPONSE STORAGE

Provision to contain effluent from fire extinguishing. Separated from food and feedstuffs. Well closed.
IPCS
International
Programme on
Chemical Safety
Prepared in the context of cooperation between the International Programme on Chemical Safety and the Commission of the European Communities IPCS, CEC 1999

SEE IMPORTANT INFORMATION ON BACK
TRINEXAPAC-ETHYL ICSC: 1268
IMPORTANT DATA
PHYSICAL STATE; APPEARANCE:
WHITE POWDER.

OCCUPATIONAL EXPOSURE LIMITS:
TLV not established.
ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation.

INHALATION RISK:
A harmful contamination of the air will not or will only very slowly be reached on evaporation of this substance at 20C; on spraying or dispersing, however, much faster.

PHYSICAL PROPERTIES
Melting point: 36C
Relative density (water = 1): 1.3
Solubility in water, g/100 ml at 20C: 0.28-2.11 (pH-dependant)
Vapour pressure, Pa at 20C: 0.003
Flash point: 133C
Auto-ignition temperature: 355C
Octanol/water partition coefficient as log Pow: 2.44 (pH-dependant)
ENVIRONMENTAL DATA
The substance is harmful to aquatic organisms. This substance may be hazardous to the environment; special attention should be given to algae, water plants and soil organisms. Avoid release to the environment in circumstances different to normal use.
NOTES
Insufficient data are available on the effect of this substance on human health, therefore utmost care must be taken. If the substance is formulated with solvent(s) also consult the card(s) (ICSC) of the solvent(s). Carrier solvents used in commercial formulations may change physical and toxicological properties. The technical product is a yellow-brown liquid. Moddus, Primo, Vision are trade names.
ADDITIONAL INFORMATION


LEGAL NOTICE Neither the CEC nor the IPCS nor any person acting on behalf of the CEC or the IPCS is responsible for the use which might be made of this information
IPCS, CEC 1999